Clay-paky A.LEDA WASH K20 User Manual download pdf (Page 22)

A.LEDA WASH

TEST

Allows you to check the proper functioning of effects.

1) Press

to return to the top menu level.

2) Use the UP

and DOWN

keys to select the required test.

3) Press

to confirm the selection or LEFT

to keep current settings.

Test sequence:

Pan - Tilt effects (Pan & Tilt)

Colours

Zoom

All effects

To enable the "Advanced Menu" set up the "Access code" (1234) using the

, DOWN

, RIGHT

keys.

Press

- "Menu advanced" appears on the display

POWER SUPPLY FAN 2 (only for A.leda Wash K20)

Lets you turn the PSU second cooling fan control on/off.

• On: Fan on (as per last specifications).

• Off: Fan off; the first A.leda Wash K20 lots (prior to projector with serial

number AC019438), were constructed with a single PSU cooling fan, a

firmware update could cause fault signals, disabling the fan, no error

will be displayed.

UP LOAD FIRMWARE

Allows you to transfer the firmware from 1 fixture to all the connected fixtures.

1) Press

, a confirmation message appears on the display.

2) Select YES to start the firmware loading or NO to keep the current

setting and return to the top menu level

SETUP MODEL

Allows you to change the default model of projector.

1) Press

a confirmation message appears on the display.

2) Select YES to define the model of projector or NO to keep the current

setting and return to the top menu level.

CALIBRATION

Allows you to adjust effects from the control panel to obtain perfect

uniformity between the projectors.

1) Press

- “channels” appears on the display.

2) Using the UP

and DOWN

keys, select the effect you wish to

regulate.

3) Press

and use the RIGHT

, UP

and DOWN

buttons to

make the adjustment by setting a value between 0 and 255.

4) Press

to confirm the selection

LEFT

to keep current settings

and return to the top level.

FACTORY DEFAULT

Allows you to restore default values of all channels (128).

1) Press

– a confirmation message appears on the display (Reset

calibration to factory default ?).

2) Select YES to reset calibration to factory default or NO to keep the

current setting and return to the top menu level.

Advanced

ode

1234

Calibration

Upload

Aleda fw

wr.Sp.

Fan 2

Transfer the firmware on all

the connected fixtures ?

Are you sure ?

Yes/No

Setup

Model

Changing to a wrong model

may damage the fixture.

Are you sure ?

Yes/No

ADVANCED MENU

TEST MENU

est

Pan-Tilt

Colour

oom

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Comments to this Manuals

No comments

Clay-paky A.LEDA WASH K20 User Manual Page 22

Comments to this Manuals

Related products and manuals for Projectors Clay-paky A.LEDA WASH K20