Clay Paky C61375 Instruction Manual

1SHARPYC61375®INSTRUCTION MANUALCongratulations on choosing a Clay Paky product! We thank you for your custom. Please note that this product, as all t

Save ToPreset 310SHARPYSHUTTERShutter on errorUsed for automatically closing the stop/strobe in the event of Pan/Tiltposition error.1)PressF- the curr

11SHARPYSYSTEM ERRORSShows a list of warnings and messages relevant to errors occurred sincethe fixtures switching-on.1) Pressing Fyou are allowed to

DMX MONITORUsed for displaying the projector DMX channel level in bit (Val) and inpercentage (Perc).FANS MONITORUsed for displaying the speed of e

13SHARPYTo enable the "Advanced Menu" set up the "Access code" (1234) using theUP B, DOWN C, RIGHT Ekeys.PressF- "Menu advanc

14SHARPYLocking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section.Opening the head covers - Fi

15SHARPYContinue ➔Upper Side61/4 TurnUpper SideUpper Side12Upper Side Upper Side543Upper Side2112 1314Opening and closing lamp compartment - Fig. 12L

16SHARPYLower Side2115Replacing fixed gobos wheel - Fig. 15WARNING: Before using personalised gobos wheel contact Clay Paky.

17SHARPYPeriodical cleaning- Fig. 16To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subjec

18SHARPY13Upper Side217Extraction of the effect modules: Preliminary operations - Fig. 17

19SHARPYExtraction of the effect modules - Fig. 18IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged

2SHARPY• InstallationMake sure all parts for fixing the projector are in a good state of repair.Make sure the point of anchorage is stable before posi

20SHARPY12Lower Side19C61190Heat screen filter - Fig. 19An optional filter kit is also available when the SHARPY projector is used in environment

21SHARPY405(15.94")330(12.99")345(13.58")185(7.28")475(18.70")280(11.02")450(17.72")315(12.40")Power supplies

SHARPYCHANNEL FUNCTIONCHANNELSTANDARD VECTORCHANNEL MODECOLOUR WHEELSTOP / STROBEDIMMERSTATIC GOBO CHANGEPRISM INSERTIONPRISM ROTATIONEFFECTS MOVEMENT

• PRISM ROTATION - channel 6STOPFAST ROTATION (43 rpm)SLOW ROTATION (1.1 rph)SLOW ROTATION (1.1 rph)FAST ROTATION (43 rpm)BIT % EFFECT191 - 192 74.7 -

24SHARPY• FROST - channel 8• FOCUS - channel 9BIT % EFFECT255 100NEAR0 0.0DISTANT0%-100%: 1.11 secBIT % EFFECT255 10000.0FROST INSERTEDFROST EXCLUDED0

25SHARPY•LAMP CONTROL (only with option LAMP DMX On) - channel: 16IMPORTANT: SHARPY is not provided with hot restrike ignitionLAMP ON BIT%EFFECT255 10

26SHARPYTiming Channel Channel function 17 Pan - Tilt time

CLAY PAKY S.p.A. - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.itRev. 0 06/11Cod. 099108-

3SHARPYUNPACKING AND PREPARATIONLamp 189W(fitted into projector)0991082 x 183102/8021PAN Mechanism Lock and Release (every 90°) - Fig. 2TILT Mechanism

4SHARPY4123215INSTALLATION AND START-UPConnecting and disconnecting power cable - Fig. 5Installing the projector - Fig. 4The projector can be installe

5SHARPYSwitching on the projector - Fig. 8Press the switch. The projector starts resetting the effects. At the same time, the following information sc

SHARPY62828Reversal of the display - Fig. 9To activate this function, press UP Band DOWN Ckeys simultaneously while the display is in the rest mode. T

7SHARPYSystem ErrorsInformationFixture HoursLampHours4LampManualControlResetChannel6MAIN MENUMENU SETTINGSet UpOptionInformationManualControlTestAdvan

8SHARPYDMX ADDRESSNOTE: without the DMX signal the Address (XXX) flashingAllows you to select the DMX ADDRESS.1) Press F- the current DMX Adress appea

9SHARPY LAMP DMXUsed for enabling lamp remote control channel.1) Press F- the current settings appear on the display (On or Off).2) Use the UP Band D